Coquet and Coast Forum
Don't forget to check out our sister site: Amble and District

Go Back   Coquet and Coast Forum > Local History, Genealogy, People and Places > Widdrington

 We no longer use activation emails. Please allow 24h after sign up and your account should work
Reply
 
Thread Tools Display Modes
  #21  
Old 20-12-2016, 11:08 AM
Coquet's Avatar
Coquet Coquet is offline
Administrator
 
Join Date: Feb 2010
Location: Amble
Posts: 3,189
Default

Quote:
Originally Posted by jumpy shore View Post
Think back to Whittle Y58 tail gate (the supply road), this Hauler was at the top with an endless rope and lowered the set down on 2 West Winnings and hauled the empties out. Overman Jack Barnfather was in charge on the 0800 day shift (1978- 1983 ish). the brakes were hand operated and if the set came of the way you had to run to the nearest DAC (an electronic voice communication system to the non miners) then inform the operator to stop it by which time it was often a scene of devastation!

The Gloster Coal Getter looks to an engineers nightmare! 5 cutting jibs means 5 jammed chains, it looks like a pre curser to a shearer.

The slusher bucket system didn't prove very popular with the 'bumpers' it often caught in the floor and jammed on the roof knocking out planks and wooden chocks which brought the goaf down in an uncontrolled manner. I think they preferred the 'tripping hammer' method. It couldn't cope with 'rammal' it pushed the stone to the coal side under the belt and it had to be shovelled out. The wire ropes were prone to kinks which made it jump and slew as it went which was very unnerving on a 3ft face with no where to go!

'Rammal' (my spelling is a best guess at a word I have never seen written down) as I understand it was the term used for smaller stone that broke away from the roof, it looked like large gravel, brick sized stones and blue slates, it was very unpredictable and could 'hap you up' with out warning, particularly prevelent Whittle Y23 on the top side.


Splendid recall. I just need a memory jog and it comes back. Were these replaced with 'Blower Stowers' on the shearers? Or was the slusher a tailgate machine and the Blower in the mothergate?
Reply With Quote
  #22  
Old 22-12-2016, 04:45 PM
jumpy shore jumpy shore is offline
Member
 
Join Date: May 2015
Location: London & Durham
Posts: 79
Default

Quite right, there wasn't enough space in the main gate due to the Armoured Flexible Conveyor (AFC) drive unit and the tail end of the belt which went in to the heading for the DOSCO Roadheader.

PS 'Ramble' (or coloquially 'Rammel') also called ‘following stone’. A thin layer of shale or sandstone found lying immediately above the coal. It would be brought down with the coal when it was fired; or loose stone lying above the coal. (N.East); or any loose rock at or near the surface. (Yorks.), also called Ratchel.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:11 PM.


Powered by: vBulletin
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.