Coquet and Coast Forum

Coquet and Coast Forum (https://www.coquetandcoast.co.uk/amble-northumberland/index.php)
-   Widdrington (https://www.coquetandcoast.co.uk/amble-northumberland/forumdisplay.php?f=12)
-   -   Ferneybeds Colliery (https://www.coquetandcoast.co.uk/amble-northumberland/showthread.php?t=616)

fraserj 15-12-2016 12:49 PM

Ferneybeds Colliery
 
I don't know whether anyone else has noticed but in the Public Notices section of todays Morpeth Herald (15th December) someone has applied for planning permission to re-open Ferneybeds Colliery. The application includes remove the existing cap, new winding gear, fans and two tunnels under the Mile Road. If there's any old sinkers out there that fancy coming out of retirement then you'll never get a better chance!!

Coquet 15-12-2016 02:24 PM

That's an interesting one!

Don't know if these links will work:

https://publicaccess.northumberland....ANS-712970.pdf


https://publicaccess.northumberland....LAN-712973.pdf

[index of docs if those have failed]


Now if this was China they'd be in full production for Christmas. Here? not a snowball's chance in hell. Imagine the effect on house prices. Heaven forbid!!


Meanwhile I pay £500 for 1.5 tons of coal. I've shoved that much off a conveyor belt underground so I could get a good lie down.

Coquet 15-12-2016 02:40 PM

I don't know what Alan and Jumpyshore will think about having a Pikrose hauler as a shaft winder. :eek:

But...he's the engineer so I'm sure it is do-able- and has been done in the past.

I have a picture....not one of these?



http://www.coquetandcoast.co.uk/imag...ose-hauler.jpg

Coquet 15-12-2016 02:42 PM

That advert from 1954. Those haulers looked exactly the same last time I was underground in 2004. :) [perhaps they were from 1954!]

Coquet 15-12-2016 03:58 PM

That new downcast shaft will be twenty odd metres from the Mile Road.

Is this not the coal Banks is after? I sense a plot...

Coquet 15-12-2016 08:04 PM

Not sure what the plan sketch in the pikrose advert is supposed to be? Is it being used to build a pack in the waste/goaf ? I remember something similar, a slusher we called it or 'slusher bucket' operated by something hydraulic about the size of a pikrose. Scooped up stones and rammed them into a pack at the face end.

Anyone know what I'm talking about??

Coquet 15-12-2016 08:28 PM

Drifting off topic but there are some weird and wonderful machines in that 1954 book: this is the Gloster Getter Cutter Loader. New one on me.

http://www.coquetandcoast.co.uk/imag...r-loader-1.jpg

http://www.coquetandcoast.co.uk/imag...oader-coal.jpg

Coquet 15-12-2016 08:33 PM

Anyway. We worked the G seam at Ellington, undersea in the bay, few miles east of Ferneybeds. The workings were constrained by the cover to the sea floor so a shallow seam there too. It had some height about it, so not split like it shows in the sketch of the section in the Ferneybeds shaft.

Coquet 15-12-2016 08:37 PM

This is the location of Ferneybeds mine as shown on the map in the planning documents, with the existing shaft on the coal authority map. Image copyright the Coal Authority.

http://www.coquetandcoast.co.uk/imag...s-colliery.jpg

Alan J. 16-12-2016 07:42 AM

Presumably whoever this is has done some homework but in my opinion he can't expect to remove the cap and find all as it was left years ago. I would imagine they will have to start from scratch, also why was it closed in the first place? That area has been opencasted in the past.

Coquet 16-12-2016 11:15 AM

He will have some water to pump out for sure. If the opencast breached any of those old workings he is planning on stopping up then the water flow will never stop? He will have to drain old opencast pits as well?

Coquet 16-12-2016 11:20 AM

I noticed his new intake arterial roadway is a 'loco road'. Locos mean lots of maintenance by fitters and electricians, regular testing etc. Not that small a scale operation then.


When Whittle was privatised did they hang on to the battery locos does anyone know?

Derilda 16-12-2016 04:35 PM

Fernybeds Colliery request.
 
Quote:

Originally Posted by Coquet (Post 6681)
This is the location of Ferneybeds mine as shown on the map in the planning documents, with the existing shaft on the coal authority map. Image copyright the Coal Authority.

http://www.coquetandcoast.co.uk/imag...s-colliery.jpg

Interesting. I have to ask, "Was this not part of the Monks/Costain era of Opencast? That, when it ended, was when the A1068 road was laid to bi-pass Widdrington Station and Ferneybeds. Prior to that traffic always used the Mile Road from Ellington and Linton.

Coquet 16-12-2016 05:20 PM

Quote:

Originally Posted by Derilda (Post 6685)
Interesting. I have to ask, "Was this not part of the Monks/Costain era of Opencast? That, when it ended, was when the A1068 road was laid to bi-pass Widdrington Station and Ferneybeds. Prior to that traffic always used the Mile Road from Ellington and Linton.

Not sure what is opencast already but Banks Mining are planning on being very close, over the other side (east) of the A1068

This Archaeology report by Durham University for Banks is very interesting. Includes a list of items of archaeological and historical interest, including shipwrecks to WW2 planes. Plus maps of the intended opencast site.

It's 60 pages and takes a long time to download:


Archaeological Services Durham University for Banks Mining. Highthorn, Widdrington, Northumberland archaeological desk-based assessment

Coquet 16-12-2016 05:40 PM

There you go:
A map showing all the surrounding opencast sites, courtesy Banks Group:

http://www.banksgroup.co.uk/wp-conte...OLOGY-PLAN.pdf

"There are a number of locations within or adjacent to the study area that have
been subject to surface mining in the past, their boundaries are shown on the
geology drawing SR03. In chronological order these were:

Ferneybeds and North Linton 1943 to 1951

Druridge, 1951 to 1954

Wallis, 1951 to 1954

Chibburn and Radar North, 1952 to 1956

Radar North, 1953 to 1973

Radar South, 1954 to 1962

Coquet 16-12-2016 05:52 PM

On that map there is a tan line showing the perimeter of G2 underground workings.
You can see the area around Ferneybeds colliery marked 'Btm Yard' that was worked by the old colliery.

There are other old workings to the east on multiple levels. I assume that is Ellington Colliery.

hollydog 16-12-2016 06:22 PM

Thanks Mike, very interesting maps and research!

Coquet 17-12-2016 08:15 PM

Quote:

Originally Posted by hollydog (Post 6689)
Thanks Mike, very interesting maps and research!


It's a pleasure. I keep revisiting that map, see more each time. You can see the three outcropping seams Banks are after (+the G seam + ?) and how the shape of the proposed opencast pit is defined by them.

Coquet 17-12-2016 08:44 PM

Banks Mining Diamond (E2) outcrop
 
That 'Diamond' (E2) seam was worked at Ellington with some sort of secondary extraction process they called 'Diamond tops' or 'Diamond topping' This was the removal of a coal roof after the rest of the seam had been extracted by the usual methods.

I can't remember the details, wish I paid more attention now.

jumpy shore 19-12-2016 09:47 AM

Haulers
 
Think back to Whittle Y58 tail gate (the supply road), this Hauler was at the top with an endless rope and lowered the set down on 2 West Winnings and hauled the empties out. Overman Jack Barnfather was in charge on the 0800 day shift (1978- 1983 ish). the brakes were hand operated and if the set came of the way you had to run to the nearest DAC (an electronic voice communication system to the non miners) then inform the operator to stop it by which time it was often a scene of devastation!

The Gloster Coal Getter looks to an engineers nightmare! 5 cutting jibs means 5 jammed chains, it looks like a pre curser to a shearer.

The slusher bucket system didn't prove very popular with the 'bumpers' it often caught in the floor and jammed on the roof knocking out planks and wooden chocks which brought the goaf down in an uncontrolled manner. I think they preferred the 'tripping hammer' method. It couldn't cope with 'rammal' it pushed the stone to the coal side under the belt and it had to be shovelled out. The wire ropes were prone to kinks which made it jump and slew as it went which was very unnerving on a 3ft face with no where to go!

'Rammal' (my spelling is a best guess at a word I have never seen written down) as I understand it was the term used for smaller stone that broke away from the roof, it looked like large gravel, brick sized stones and blue slates, it was very unpredictable and could 'hap you up' with out warning, particularly prevelent Whittle Y23 on the top side.


All times are GMT. The time now is 02:01 AM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.